Forced Download Mode (EDL)

Rhino Pi-X1 is equipped with a 3-PIN pin header for entering EDL mode. EDL (Emergency Download Mode) is an emergency download mode for Qualcomm processor devices, mainly used for emergency recovery and firmware flashing.

Usage Guide

1. Short-circuit the BOOT and L18B signals with a jumper cap.
2. Connect the DC power supply.
3. Remove the jumper cap.

Under normal circumstances, the motherboard will enter EDL mode. You can then connect a TYPE-C cable for firmware flashing.

Note

You can refer to the Hardware Information tutorial to locate the corresponding hardware interface.